Position Title: Bowling Technician

Location: Patrick Space force Base

Routine Lane Maintenance Services

General: The applicant shall be responsible for performing and documenting preventive lane maintenance services.

• 
  Daily preventive maintenance shall include the following and shall be documented on the checklist provide in Appendix A:

• • 
    Check call sheets for the previous day and transfer calls to stop summary

• • 
    Cycle/check machines, foul lights and related equipment
  • Investigate/correct machines that have developed a malfunction pattern

• • 
    Clean ball lift and distributor belts

• • 
    Clean pin elevator

Clean pin guide and orientor pan

Keep work area, workbench and service isle clean & orderly

Assign and record preventive maintenance on the preventive maintenance charts

Weekly preventive maintenance shall include the following and shall be documented on the checklist provide in Appendix A:

Clean shuttle and bin

Clean, check ball door exit, lift arm, paddle, LBS operation

Clean ball lift assembly, lift rods

Clean pit carpet belt

Clean pin curtain, cushion, drip pans

Tighten plows, check for cracks and replace as needed

Change ball wipes

Clean bowling pins

Inspect distributor, observe for proper operation and correct as needed

• 
  Monthly preventive maintenance shall include the following and shall be documented on the checklist provide in Appendix A:

• • 
    Check, clean, correct, adjust, spotting cups, respot cells, and table assembly in general.

• • 
    Check, clean correct adjust, sweep assembly

• • 
    Check, clean, correct ball tracks, down sweeps

• • 
    Check, correct, adjust carpet belt tracking, front and rear rollers

• • 
    Check, correct, adjust bounce board, dampers, supports, ground strap

• • 
    Check, correct, adjust cushion assembly and shock

• • 
    Blow out sweep and table brakes

• • 
    Check all machine belts, replace asneeded

• • 
    Clean distributor assembly

• 
  Quarterly preventive maintenance shall include the following and shall be documented on the checklist provide in Appendix A:

• • 
    Clean the machine framework, drip pans

• • 
    Complete quarterly lubrication items

• • 
    Tighten front and rear jackscrews

• • 
    Tighten pin cushion and hangar boxbolts

• • 
    Remove distributor clutch assembly. Clean the pinion and sleeve, friction disks metal and plastic. Use fine emery cloth to smooth friction disk. Lubricate pinion and sleeve and reassemble.

• • 
    Check: pin holder brackets, shuttle straps, shuttle operator rod. Repair as needed. Tighten shuttle bolts.

• 
  Yearly preventive maintenance shall include the following and shall be documented on the checklist provide in Appendix A. Check the following for worn or broken parts, repair or replace as needed:

• • 
    Table and sweep arms, shaft bushings, keyways and pillow blocks

• • 
    Complete annual lube chart items

• • 
    Check/correct gearbox oil leaks and change oil

• • 
    Rebuild table drive

• • 
    Rebuild carpet roller and pit assembly

• • 
    Rebuild distributor assembly

• • 
    Rebuild ball lift assembly, light ballsensor

• • 
    Clean underground return tracks, tighten down sweep track

• 
  Routine Lane Machine Services

4.1 General: The contractor shall be responsible for performing and documenting lane machine services as shown below:

• 
  Daily preventive maintenance shall include the following and shall be documented:

• • 
    Using a clean cloth, wipe down the entire length of the power cord

• • 
    Completely wipe down oil compartment. Do not clean the transfer brush or buffing brush unless needed

• • 
    Clean drip pads on each side of the machine in the oil compartment

• • 
    Clean the drive, lane distance and momentary wheels. Dust & lint shall not be allowed to build up

• • 
    Wipe squeegee clean & inspect for wear. An extra set of blades must be kept on-site as a backup and must be stored in a dark cool space

• • 
    Wipe down front of the machine

• • 
    Wipe off outside of the machine

• 
  Monthly preventive maintenance shall include the following and shall be documented:

• • 
    Using compressed air, remove dust from all surfaces

• • 
    Inspect recovery tank filter. Replace as specified in Appendix 3 or as needed

• • 
    Clean lint from transfer brush and clean between brushes

• • 
    Replace duster cloth if required. If the duster cloth is changed clean the entire cleaning compartment and lube the cleaner head bar